Digital Electronics Corporation Pro-Face PL-6900 Series, User Manual

Page: 30 / 105

2 - 7 PL-6900 Series User Manual
Specifications
4 RS-232C Interface (COM1/COM2/COM3)
Pin No. Signal Name Pin No. Signal Name
1 CD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 GND
5 RAS Interface
Pin No. Signal Name Pin No. Signal Name
1 GND 14 GND
2 +5V 15 +5V
3 +12V 16 NC
4 NC 17 NC
5
RESET INPUT (+) 18 NC
6 DIN 0 (+) 19 NC
7 DOUT (-) 20 NC
8 DOUT (+) 21 LAMP OUT (-)
9 ALARM OUT (-) 22 LAMP OUT (+)
10 ALARM OUT (+) 23 NC
11 RESET INPUT (-) 24 DIN1 (-)
12 DIN 0 (-) 25 NC
13 DIN 1 (+)
Item Feature
Input DIN 0,1 Digital Input Port (2 points)
RESET
Hardware can be reset via external
reset signal.
Output DOUT Digital output port (1 point)
Alarm Alarm signal output port (1 point)
Lamp Alarm lamp connection port (1 point)
Dsub 9 pin (Male)
Screw Size: (4-40): Inch Type
9
8 7
6
5 4 3 2 1
LED Status
Green,Lights Continuously Normal Operation
Orange, Lights Continuously System Monitor Alarm has occurred
Orange, Blinking
When the Mirror Disk unit is installed, indicates that a hard
disk error has detected
Power Lamp LED Error Display
The Power Lamp LED indicates when the RAS feature has detected an error, due to a
PL operation or environment related problem.
To use this feature, you need to install the RAS system monitor feature from the PL’s
additional floppy disk. 6-1 Floppy Disk File List
Screw Size: (4-40): Inch Type
D-Sub 25 pin (Male)
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20 21 22 23 24 25