Digital Electronics Corporation Pro-Face PL-6900 Series, User Manual

Page: 16 / 105

xv
Preface
PL-6900 Series User Manual
CE Marking
The PL690*-T4* units are CE marked, EMC compliant products.
<Complies with the following Standards>
„
Safety
EN60950
„
EMI (EN50081-2)
EN55011 group1 (Class A)
„
EMS (EN50082-2)
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-6, EN61000-4-8, ENV50204
If following requirements are not met, the PL may fail to meet EN60950 standard requirements.
„ „ „ „ „
Equipment with a PL mounted in it requires UL/cUL evaluation for the combination of the
PL and equipment.
„ „ „ „ „
The PL must be used as a built-in component of an end-use product.
„ „ „ „ „
Use the PL indoors only.
„ „ „ „ „
When connecting the PL’s power cable, be sure to use a cable that is appropriate for the
current and voltage used and that has conductive wires that are 0.75 mm
2
or larger.
„ „ „ „ „
When installing the PL in a metal panel or cabinet, be sure to place the PL’s Power discon-
nect device (cut-off switch) where the unit’s operator can easily reach it.
„ „ „ „ „
There is a danger of explosion if the backup battery is incorrectly replaced. This battery
should be replaced only with same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
„ „ „ „ „
Be sure the cabinet/enclosure the PL is built into uses an EN60950 approved sheet steel structure.