Express Registration
These steps help speed registration and initialization of multiple new locks.
37
Go to the lock that was programmed in
Step 1 on page 36.
Press:
= ` 66 `
LED light will flash.
1
Touch the Programming Key (yellow) to the key slot.
A two tone beep will be heard and the LED light will
turn off.
The Programming Key (yellow) has copied the lock
programming information from locker #1 and is now
ready to program all other locks in the locker room.
2
Test the programming by touching the Manager
Bypass Key(s) (black) to the key slot of the lock(s).
If programming is successful, the lock will operate.
4
Touch the Programming Key (yellow) to the key slot
of all locks to be programmed.
A two tone beep will be heard and the LED light will
flash once to indicate successful programming of
each lock.
3