Spirit Digital 328 v2.0
4
4
4
4
Before launching Pro Tools, we must configure OMS to account for the 328. This
guide will refer to OMS version 2.3.8.
3)
Configure the new device as described below:
MIDI Setup
MIDI Setup
MIDI Setup
MIDI Setup
2
It is essential that 2-way MIDI
communication occurs between
the 328 and Pro Tools.
Using standard MIDI cables,
connect the 328 MIDI Out Port to
your MIDI interface’s MIDI In Port,
and connect the 328’s MIDI In
Port to the interface’s MIDI Out
Port.
Interface MIDI Out
328 MIDI In
328 MIDI Out
Interface MIDI In
This 2-way communication
configuration will allow full
dynamic automation of the
Digital 328, and it will allow
control of the internal mixer
within Pro Tools from the 328.
OMS Setup
OMS Setup
OMS Setup
OMS Setup
Set the Device ID to 0.
1)
Launch the OMS Application.
2)
Under “Studio” select
New Device
Check “Is controller” and
“Is multitimbral”.
Enable all receive channels
Enable MIDI Timecode
(MTC) and MIDI Machine
Control (MMC) as indicated.