Pro Tools Setup Guide
5
5
5
5
Relating to the control of the internal mixer within Pro Tools, since we are
emulating a pre-set Digidesign controller personality, a second “phantom”
328 must be created. This device will not be an actual device – instead it will
act to “emulate” another controller surface, thus gaining access to 16 more
controls in Pro Tools.
1)
Select NEW DEVICE as in step 2 above
2)
Configure the new device as shown:
4)
Hit OK – the Digital
328 device should now
appear in your OMS
Studio Setup as
indicated here.
Do not check any boxes
Make sure channel 1 is enabled
under “Receive Channels”.
Configuring the “phantom” device
Configuring the “phantom” device
Configuring the “phantom” device
Configuring the “phantom” device
