DigiDesign Hybrid, Manual

Page: 77 / 84

Appendix C: Part A and B Insert Effects 73
Parametric EQ
Two-band equalizer
Enhancer
Psychoacoustic spectrum shaping
Distortion
Hard clipping distortion
Overdrive
Softer distortion with a gradual onset
Bit Reduction
Digital “Lo Fi” quality degrada-
tion
Amp Simulator
Output Output level trim
Gain 1 Cut/boost amount
Freq 1 Cut/boost frequency
Width 1 Cut/boost width
Gain 2 Cut/boost amount (second band)
Freq 2 Cut/boost frequency (second band)
Width 2 Cut/boost width (second band)
Hi Depth High frequency boost, combined
with mid cut
Hi Tune High/mid tune
Lo Depth Low frequency boost
Lo Tune Low frequency tune
Mix Wet/dry mix
Drive Distortion amount
Bias Distortion character, adjusts the
balance between even and odd
harmonics.
Out Output level trim
Tone Distortion tone
Mix Wet/dry mix
Drive Overdrive amount
Bias Overdrive character, adjusts the
balance between even and odd
harmonics.
Out Output level trim
Mix Wet/dry mix
Rate Simulated sample rate
Depth Sample bit depth
Slew Rate Maximum rate of change of output
waveform, for a soft, woolly
frequency-dependant distortion
Mode Linear or companding, sets if the bit
depth is fixed or depends on the sig-
nal level.
Mix Wet/dry mix
Model Selects an amplifier model, drasti-
cally changes the tone character.
Drive Distortion drive amount
Feedback Feedback amount (result depends
on input signal)
Treble Treble boost—optionally in or out of
phase for different tones
Mode Mono/Stereo operation, Mono
saves CPU and in some cases
sounds more solid.