Hybrid Plug-In Guide
56
All Morph group assignments and settings are
saved and restored with the patch.
Morph Group Assignment
To assign a control:
1
Choose a Morph group by clicking the accord-
ing Edit Morph button.
2
Shift-click the control you want to assign,
such as Filter cutoff.
3
Set the morph range by Shift-dragging the
control.
4
Set the control’s morph range.
• To specify a morph positive in direction,
Shift-drag the control, as you would to in-
crease its value.
• To specify a morph negative in direction,
Shift-drag the control, as you would to de-
crease its value.
• The pin on a rotary control or the knob of
a fader marks the start value of the morph.
The yellow corona of the rotary control or
the yellow line of a fader indicates the
morph range and direction.
• You can make adjustments and assign-
ments as long as you are in Edit mode.
5
Deactivate the Edit Morph button of the ac-
cording Morph group to finish editing.
To assign a graphic control:
1
Choose a Morph group by clicking the accord-
ing Edit Morph button.
2
Shift-click the graphic control you want to as-
sign.
3
Set the morph range by Shift-dragging the
control.
• With envelopes, the yellow envelope repre-
sents the values the envelope morphs to.
The blue colored envelope in the back-
ground represents the original envelope.
Use Shift-drag to change the yellow enve-
lope to achieve the desired morph. Drag-
ging without Shift key adjusts the blue
colored envelope.
– or –
• With LFOs, Shift-click the rate cursor and
drag left to increase the rate or drag right to
decrease the rate through morphing. A yel-
low bar represents the morph range and di-
rection.
4
Deactivate the Edit Morph button of the ac-
cording Morph group to finish editing.
You can make adjustments and assignments as
long as you are in Edit mode.
To view morph ranges:
1
Click the edit button of the Morph group you
want to view. The assigned morphs display on
the active plug-in page.
2
Select the page to view the control.
A Hybrid control can only be assigned to
one Morph group at a time.
Graphic controls like envelopes can only be
assigned to one Morph group at a time.
Summary of Contents for Hybrid
