Chapter 4: Operating Hybrid
31
Graphic Editing of Envelopes
The blue lines in the control graph illustrate
times and levels of the envelope. The Modula-
tion envelopes are bipolar, and have freely ad-
justable levels. To support these features their
graphic controls are slightly different. Basic
editing of times and levels is the same for all
envelopes. The start or end of a segment, or the
joint between two segments, can be dragged:
horizontally to adjust times and vertically to
adjust levels.
To adjust the time of an envelope segment:
Drag the start or end of a segment or the joint
between two segments horizontally with the
mouse. To decrease the segment time, drag the
control to the left. To increase the segment time,
drag the control to the right.
To adjust the level of an envelope segment:
Drag the start or end of a segment or the joint
between two segments vertically with the
mouse. To lower a level, drag the control down.
To raise a level, drag the control up.
To type in a value from keyboard:
The last edited time and level (if available) dis-
plays in the text box of the Envelope section.
Type in a value in the text box for the time or
level you want to adjust.
Filter Env and Amp Env
The envelopes for filter and amplifier have five
segments with the following parameters and
functionality:
Attack Time
Specifies the time needed for the at-
tack segment to rise from zero to full amplitude.
Use shorter times for an immediate start of the
sound or modulation. Longer times cause the
sound or modulation to fade in. The control
range is from 0 ms to 32 s.
Decay1 Time
Specifies the time for the first de-
cay segment to fall from full amplitude to the
level set by Decay1 Level. When the level is set
to maximum, Decay1 Time acts like a hold time.
The control range is from 0 ms to 32 s.
Decay1 Level
Adjusts the end level for the first
decay segment. Levels lower than the maximum
cause the sound or modulation to fade out. The
control range is from 0% to 100%.
Decay2 Time
Specifies the time for the second
decay to reach the sustain level. Depending on
the sustain level and the level of the prior first
decay, the envelope rises or falls during this seg-
ment. Therefore, the sound or modulation fades
back in or fades further out. The control range is
from 0 ms to 32 s.
Sustain Level
Adjusts the level of the sustain seg-
ment. The envelope’s signal remains on this
level as long as the note is held. The control
range is from 0% to 100%.
Release Time
Specifies the time for the release
segment to fall to zero when the note (key) is let
off. Use shorter times for an immediate stop of
the sound or modulation. Longer times cause
the sound or modulation to fade out. The con-
trol range is from 0 ms to 32 s.
On the Modulation envelopes, use Option-
click (Mac) or Alt-click (Windows) to reset
the level of a segment.
Summary of Contents for Hybrid
