DigiDesign Hybrid, Manual

Page: 23 / 84

Chapter 4: Operating Hybrid 19
The Part Pages
Part A and B pages give detailed access to all
sound generating parameters of Hybrid. The two
pages provide the same set of controls. For this
reason, the following description applies to both
Part A and B.
The Part page has several functional sections.
The order of these relatively follows Hybrid’s
signal flow. The oscillators stretch across the
upper area, followed by the Filter section in the
center of the panel. The Amplifier section is
located below the filter (at the end of the signal
flow). The Filter and Amplifier envelopes are
located on the right and the freely assignable
Modulation envelopes and LFOs are on the left
of the page.
For information on choosing a page, see
“Accessing Parts” on page 18.
Hybrid Part page
Oscillator sections Filter section
Amplifier section Envelope sections Low Frequency Oscillators