DigiDesign Hybrid, Manual

Page: 73 / 84

Appendix C: Part A and B Insert Effects 69
Space Chorus
Chorus with inverted feedback
above a crossover frequency for a wide sound
Ensemble
Chorus with complex modulation
waveform for a more lively thickening effect
Flanger Simple flanger
Step Flanger
Same as Flanger, but with addi-
tional parameters
Phaser
4-pole phaser, for gentle phase shift ef-
fect
Mix Wet/dry mix
Rate Modulation rate (increase for more
obvious pitch modulation)
Depth Modulation depth (amount of pitch
modulation)
Pre Del Initial delay, to vary the “tightness”
of the chorused voices to the dry
signal
Crossover Adjust the crossover frequency to
stop unwanted modulation of bass
frequencies.
Mix Wet/dry mix
Rate Modulation rate (increase for more
obvious pitch modulation)
Depth Modulation depth (amount of pitch
modulation)
Shimmer Introduces faster modulation
Width Stereo width adjustment
Mix Wet/dry mix
Rate Sweep rate
Depth Sweep depth (reduce for more
swooshiness)
Feedback Feedback amount
Pre Del Initial delay, adjusts the minimum
delay time or maximum flange
frequency.
Mix Wet/dry mix
Step Rate Rate of an “S&H” LFO, used as a
source for the Step Depth para-
meter.
Depth Controls the mix between the
smooth and stepped LFOs. If the
rate is low and the step Rate is high,
this produces an arpeggio-like
effect. If the Rate is high and the
Step Rate is low, a random step
effect is achieved.
Mix Wet/dry mix
Rate Modulation rate
Depth Modulation depth
Feedback Feedback amount
Stereo Offset between left and right modu-
lation
Centre Set the phase shift around which
the modulation occurs, to bias the
effect to higher or lower frequen-
cies.