![background image](http://html1.mh-extra.com/html/starling-technologies/osc3/osc3_manual_1363980001.webp)
OSC3
1.
2.
3.
1.
2.
3.
4.
5.
1. Introduction
OSC3 is a trio of oscillators with one master VCO (oscillator 1) and two oscillators (oscillators 2
and 3) that spread up and down from the master oscillator (center) frequency. It is a nod to the
oscillator sections on classic monosynths, but with a focus on unconventional musical control
and patching opportunities.
2. Controls and IO
If you haven't yet, take a glance at
of Via's controls, IO, and user interface.
Knobs
COARSE sets the base pitch of the oscillator cluster over a 4 octave range.
FINE adjusts the pitch up to a fifth above the base pitch.
spreads oscillators 2 and 3 up and down from the center frequency respectively. See
for more detail on the spread pattern.
Summary of Contents for OSC3
Page 6: ......