5
th
tep:
S
Fixing the bearing support
a.
;
Replace the fastener's washer (P21) for the washer (P7)
b.
;
Use the fastener (21); does not accompany the product
c.
Place silicone rubber under the bearing; then fix the bearing support (P19) to
the central hole, as shown in the image
.
Quantity of parts used in this stage:
P7 = 1x - Washer D= 30,5 x 10,5 x 9mm
P19 = 1x – Bering
P21 = 1x - Fastene
r
Torniquete
Tx1500
13
ISOMETRIC VIEW
P19
UPPER VIEW
Screw must be
centralized in
the bearing.
P7
P21
INFORMATION:
Add more Molykote grease to the bearing since the grease sent is for
transport only.
Repeat the operation above in the both rotating centers.
