10
th
Step:
Fit the central pivoting arm
a.
Grease the bearing support (P19). (We recommend Molykote BR-2 Plus
grease);
b.
Fit the central arms assembly (P28) in the bearing support (P19). In this stage,
the assembler or mechanic cannot drop the central arms assembly, so we suggest
an auxiliary assembler or to tie the central arm to the structure;
c.
Align one of the line of arms to the stationery arms, as shown in the image:
Quantity of parts used in this stage:
P28 = 1cj (
Assembly obtained in the 4 step of this Manual) – Central arm
th
Fitting of the arms in the base
P19
P28
Align pivoting arm
with stationary arm
Align pivoting arm with
.
central metalon
Position of the pivoting arm in the structure.
This must be the pivoting arm's position to fit the locking
system detailed in the next step.
Torniquete
Tx1500
18
