Glass sides:
a.
Fit the sides (P39) and (P40) so to form an arch;
b.
Screw the sides using washer (P41) and screw (P8); repeat on the four fixing
points (two on the upper part, two on the lower part);
c.
Fix the glass support (P42) to the rods' inner parts using washers (P25) 2x and
screws (P20) 2x in each support;
d.
Fit the nut for the glass support (P45) to the glass support (P42); after the
nut was placed on the other side, place the two PVC washers (P44);
e.
Repeat items “c” and “d” 16 times in each support fixation.
Quantity of parts used in this stage:
P8 = 4x - Hexagon head screws M10 x 20
P20 = 32x -
M4 x 12
cross head screw
P25 = 32x -
D4
flat washer
P39 = 1x -
2 side rods
P40 = 1x -
1 side rod
P41 = 4x -
flat washer D10
P42 = 16x -
glass support
P44 = 32x -
PVC washer
P45 = 16x -
glass support nut
This assembly will result in the set (P48) – Assembly of glass sides.
Torniquete
Tx1500
10
P39
P45
P41
P25
P20
P42
P44
P8
P40
