Summer 07060EZ Instruction Manual Download

Page: 1 / 12

Multi-Use Extra Tall

Walk-Thru Gate

INSTRUCTION MANUAL

Please read the following instructions carefully.

Keep this instruction manual and save for future reference.

For technical support, contact us at

1-401-671-6551

www.summerinfant.com/contact

Tools required: Phillips-head screwdriver,

measuring tape (not included),

and wrench (included).

For use with children from 6 - 24 months.

Keep small parts away from children.

Adult assembly required.

Fits openings from 29" - 48" wide.

07060EZ/07970C/07060F

Thank you for purchasing the Multi-Use Extra Tall Walk-Thru Gate from Summer Infant.

This gate allows you to create and maintain a secure environment for your child just about anywhere in

your home. It has a hinged swinging door that opens easily in either direction with one hand,

as well as hold-open and auto-close features for added convenience.

Text "Extra Tall" to 38344 for a demo & install video.

Have questions? We're here to help.

For technical support please

Summary of Contents for 07060EZ













Search results

Summary of Contents for 07060EZ

Reviews:

Related manuals for 07060EZ

Brands by name

Popular brands

Summer 07060EZ, Instruction Manual

Search results

Summary of Contents for 07060EZ

Reviews:

Related manuals for 07060EZ

Brands by name

Popular brands