background image

To User 

To User 

Scania Higer A30, mounted with original SCANIA chassis, is a 

newly developed deluxe coach. 

The coach mainly runs on the high graded road and highway for 

passenger transportation and tourism, etc. 

This driver’s instruction contains operation, structure, specification 

and maintenance of the coach body. You are kindly advised to read the 

manual carefully for the correct operation and maintenance of your 

coach. 

In regard to the chassis instruction, please read the  “Scania 

Driver’s Instructions”  and keep  the operating instructions within the 

vehicle. 

Correct operation and maintenance can result in good 

performance and longer service of the coach and lower operating 

costs. 

This driver’s instruction is edited on basis of the products before 

delivery from the factory. Higer Bus Company Limited reserves the 

right to modify the specification or change the parts or components of 

this model at any time without modification of the delivered coaches. 

In case of any questions or suggestions concerning our coaches, 

you are welcome to provide feedback for our continuous improvement 

of our products as well as better service to you. 

Higer Bus Company Limited 

                                                    June 2012

Summary of Contents for Higer A30




























































































Reviews: