background image

Read and follow all 

safety instructions and 

important notices in 

these instructions as 

well as on the product 

itself.

AquaNano

30/40

Before  you  work  on  your 

aquarium,  wash  your  hands 

and  arms.  It  is  very 

important  to  remove 

dirt,  moisturiser  and 

other impurities.
Unpack  all  filter  media  and 

rinse before initial use. 
Rinse the inside of the 

aquarium  with  water 

to remove any dust or 

other contaminants.

Instructions version: 10/12/2018

All fishes have specific 

requirements for their 

care. 

Please  seek  advice 

from  your  Aqua  One 

retailer  for  correct 

care requirements and 

species compatibility.

Facebook

Like us on

Inspiring Excellence in Fish Care!

Instructions Front Page

 

Australia: 

www.aquaone.com.au

   

New Zealand: 

www.aquaone.co.nz 

   

United Kingdom: 

www.aquaone.co.uk

   

All other countries: 

www.aquaone.com.au

C

USTOMER

 

C

ARE

C

USTOMER

 

C

ARE

Thank you for choosing this Aqua One product.
Your Aqua One product is covered for parts and labour for 1 year from the date of purchase as detailed in 

the terms of the Guarantee in this instruction manual. For any inquiries or concerns regarding this product 

or any of our products, please do not hesitate to contact your local Aqua One Retailer or visit Aqua One 

Customer Care online in your country of purchase via the websites listed.

Summary of Contents for AquaNano 30













Reviews: