5.23
SNM15
AT Command Set Description
Digicom SpA
ATDW
Instructs the modem to wait 5 sec for a dial tone before dialling
the rest of the dial string. If the dial tone is not detected the call
will be aborted and the message “NO DIAL TONE” will be
displayed.
ATD,
This command instructs the modem to pause during dialling for
the number of seconds set by the value of S8 register. The
character “,” can be inserted in the number to call when the
modem is installed on a line of a PABX.
ATD/
This command inserts a delay of 1/8 sec in the dialling.
