8.4
SNM15
Use of the S-Register
Digicom SpA
value of parameter
F
must compulsorily be different from 0
(zero). The value is determined in tenths of a second.
S10
Disconnection Time for Carrier Absence
This register determines the time interval between the loss of
carrier and the disconnection of the modem. The value is in tenths
of a second.
S12
Watch Time for Escape
This sets the watch time that comes before or after the ESCAPE
character sequence. The value is expressed is fiftieths of a second.
S13
,
S14
,
S15
,
S16
,
S17
Internal registers.
25
Delay for the “DTR ON-OFF” Disconnection
This determines the delay between switching off the DTR and
disconneting the modem.
A typical example of the use of this register is given in paragraph
5.4. (connection in synchronous mode), where it is used to enable
a call with an asynchronous DTE by the Command and then the
synchronous emulator on the Main, without causing the modem
to be disconnected. The value is expressed in seconds.
