4.2
SNM15
Use of the Modem
Digicom SpA
the ANS push-button may remain in the OUT position,
since when the call comes in from the telephone line,
it will be automatically set to ANSWER (see register
S0). This option is available when the terminations
are indifferently set to call and to answer, typically in
unattended automatic systems. In leased or manual
connections on of the two modems should be preset
to call and the other to answer.
TEST
Enabling the analogical and digital loops (Loop 3 &
2). This push-button, if pressed, will cause loop 3 to
be enabled when the modem is disconnected from the
line, whereas when it is hooked up with the DATA
push-button (modem preset in data) it will cause
digital loop 2 to be enabled.
