Digi SM-110 Operation Manual Download

Page: 102 / 147

SM 110 READ REPORT MODE

5. READ REPORT MODE

5.1 Report Factor Select

Whether to use the following report print factors depends on the type of report. Please refer to

Operation Flow in Report Mode.

PRINT LIMIT

For setting the report range, Department Number, Main Group Number or PLU Number to start and
finish is to be entered.

LOWER LIMIT:

DEPARTMENT: No.1 - No.99

MAIN GROUP: No.1 - No.999

UPPER LIMIT: DEPARTMENT: No.1 - No.99

MAIN GROUP: No.1 - No.999

5.2 Report Type Selection

There are two ways to select the Report Type by using different keys such as:

•

Preset keys that the desired Report Type is assigned to .

•

By press [X] or [

︽

][

︾

]key to select the Report Type .

Enter Report Mode (“X” Mode) from Stand-by Status.

DISPLAY

OPERATION

＄

/kg

＄

REMARK

0.000

0.00

Stand-by

Status

[MODE][MODE] X1.1

READ MG DAILY

Enter

mode.

[X]

X2.1

READ

PLU

DAILY

Press [X] key to select the Report Type.

All manuals and user guides at all-guides.com

Summary of Contents for SM-110




















































































































































Search results

Summary of Contents for SM-110

Reviews:

Related manuals for SM-110

Brands by name

Popular brands

Digi SM-110, Operation Manual

Search results

Summary of Contents for SM-110

Reviews:

Related manuals for SM-110

Brands by name

Popular brands