DURATION time and press to
confirm.
The display shows flashing .
4. Turn the knob for the temperature to
set the hours for END time and press
to confirm. Turn the knob for the
temperature to set the minutes for
END time and press to confirm.
The display shows
and the set
temperature.
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds for
2 minutes. and time setting flash in the
display. The oven turns off.
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the heating functions
to the off position.
Setting the MINUTE MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
again and again until
and "00" flash in the display.
2. Turn the knob for the temperature to
set the seconds and than the minutes.
When the time you set is longer than
60 minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any button
to stop the signal.
USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire shelf
on the guide bars above.
13
