manualshive.com logo in svg

Dieta S-CLASSIC, User Manual, Page: 9 / 35

Share
Download
Dieta S-CLASSIC User Manual Download Page 9

DIETA SOUPPER / S-CLASSIC  user manual  1/2018 • Page EN-6

Soupper display without chilling option

Soupper display with chilling option

Jacket temperature Control

Food temperature control

•  Control used when optional food temperature 

control is not installed

•  The temperature is controlled with jacket
•  temperature, temperature can be set to 

0...125°C

•  Temperature display shows jacket temperature

Possible Chilling option:
•  CH1- Chilling:
Chilling is activated and deactivated by pressing 
the chilling button on the display. Chilling 
performed with tap water (food water), which flows 
to drain. Chilling target temperature can not be 
set. Jacket has to be emptied manually before next 
cooking.

•  Optional food temperature control is installed.
•  The temperature is controlled with food 

temperature, temperature can be set to: 
0...125°C

•  Temperature display shows food temperature

Possible chilling options:
•  CH2-Chilling:
Chilling is activated and deactivated by pressing 
the chilling button on the display. Chilling 
performed with tap water (food water), which flows 
to drain. Chilling target temperature can be set. 
Jacket has to be emptied manually before next 
cooking.

•  CH3-Chilling:
Activated and deactivated by pressing the chilling
button. Enhanced chilling with tap water (food 
water), which flows to drain. Chilling target 
temperature can be set. Automatic emptying of the 
jacket before next cooking.

Summary of Contents for S-CLASSIC




































Reviews:

No comments