DIETA SOUPPER / S-CLASSIC user manual 1/2018 • Page EN-28
The kettle has to be serviced regurlarly to
maintain the kettle in a good condition.
The kettle has a service hour meter, which will
inform when the service is needed with a text
SEruiCE
.
Service is sheduled after every 500 used hours or
yearly.
Even though the used hours are under 500,
the kettle has to be serviced yearly.
Since the kettle is a pressured device, the
safety equipment and the pressure release
valve have to be checked yearly.
When the kettle display has the service text on
it, you should contact the local service.
You can still use the kettle; just press any of
the top row buttons and the text will disappear.
The text will show up again in the next start up.
SERVICE
To see the used hour meter: start up the kettle
and press the COOK-button at the same time.
The display will show the used hours in total for
example
T 1234
. This is the total amount of
hours used for heating.
To see the used hours after the previous service:
Press the [+] button under the COOK-button.
The display will show the hours after previous
service, for example
h 504
.
You can browse between these two values by
pressing the [+] button under the COOK-button.
You can exit the used hour meter display only
by turning the kettle off and then on again.
Note! It is very important to make the kettle
service when scheduled, as the kettle is a
pressured device, it has to be serviced at
least yearly.
The service will reset the service hour meter
when the service is done.
Service hour meter
Checking the used hour meter