manualshive.com logo in svg

Dieta S-CLASSIC, User Manual, Page: 4 / 35

Share
Download
Dieta S-CLASSIC User Manual Download Page 4

DIETA SOUPPER / S-CLASSIC  user manual 1/2018 • Page EN-1

The kettle heats with a steam jacket. The maximum temperature is 128°C (1,5bar
over pressure).
The kettle has to be installed properly to ensure fault free usage. Fixing to the
floor is an important part of the floor model kettle’s construction.

If the kettle is broken or malfunctions, call the service. Inform service about the
kettle type, serial number and explain the fault as well as possible. If the kettle
display has extra text on it, tell that also to the service.

GENERAL INFORMATION

WARNINGS

Hot surfaces and liquids

Moving parts

Please pay attention to the following important information before using the kettle.

The kettle part may be hot.

Be extra careful when touching the inside of the kettle or the rim.

Be extra careful when opening the lid: the steam is burning hot.
If you cook oil or sugar, both the kettle and the food are very hot. In addition, the oil and sugar liquid 
can stick to the skin very easily.

Be extra careful when mixing hot liquids. The food may spill if the mixing speed is too high. Note! 
Using auto-reverse usually spills more than using forward-only mixing mode.

Do not put your hand or any tool into the kettle when the mixer is on. Note! This also applies to the 
safety speed mixing.

Put the mixing tool securely to the kettle before putting any food to the kettle. Make sure that the tool 
is locked properly. Beware when removing the tool, it may be hot!

Before tilting the kettle, make sure there is nothing below or behind the kettle. Always tilt with care.

Summary of Contents for S-CLASSIC




































Reviews:

No comments