manualshive.com logo in svg

Dieta S-CLASSIC, User Manual, Page: 27 / 35

Share
Download
Dieta S-CLASSIC User Manual Download Page 27

DIETA SOUPPER / S-CLASSIC  user manual  1/2018 • Page EN-24

Removing a program from the memory

Make sure you have the right program number to remove. A
removed program cannot be rescued.

1. Press three times the PROG-button (display shows 

dELETE

).

2. Choose the program number you want to remove with
the [+] and [–] buttons under the COOK-button.

3. When you have selected the right program number,
press the PROG-button again. The display shows

dELETE

NOTE! You can still undo at this point by pressing the STOP-
button.

4. Confirm by pressing the PROG-button.

User settings

In the user setting, you can set the default settings for the 
kettle.

1.  You can access the user settings by pressing the PROG 

and TIMER buttons at the sime time for about 4 seconds. 
The display will show 

PrOFILE

. 

2.  Press the PROG-button. The display will show 

Coo 95C

. 

Here you can change default setting for the cooking 
temperature, which is suggested when the COOK-button 
is pressed.  
You can adjust the value by pressing the [+] and [–] 
buttons under the COOK-button.

3.  Press the PROG-button again. The display will show 

ChiL 10C

 

 

Here you can change the default setting for the chilling 
temperature, which is suggested when the CHILL button 
is pressed. You can adjust the value by pressing the [+] 
and [–] buttons under the COOK-button.  

Note! This option will not be shown if there is no chilling 
option in the kettle.

4.  Press the PROG-button again. The display will show 

LEn 10

 

(default setting 10 minutes)  

Here you can change the default setting for the cooking 
time, which is suggested when setting the cooking time.

5.  Press the PROG-button again. All the changes will be 

saved automatically.

Summary of Contents for S-CLASSIC




































Reviews:

No comments