2.2.1
Motorized Card Reader
The motorized card reader reads and writes magnetic stripe cards and memory
chip cards that are ISO 7816 compliant. The card reader reads tracks 1 and 2, and
reads and writes track 3 on magnetic stripe cards. If errors are detected when the
card is read the
fi
rst time, the card can be held in the transport and read again. A
gate prevents cards without chips or cards without track 2 from entering the card
reader. The gate also prevents the card being inserted incorrectly.
Anti-skimming
The card reader has an anti-skimming sensor to identify fraudulent card reader
devices. CIM86 is an available option with the reader.
Retained Cards
The card reader has either an open bin or a bin that can be locked to hold retained
cards, both bins hold cards that are not returned to consumers. A card may be
retained for the following reasons:
• The network commands the cash dispenser to retain the card.
• The card cannot physically be returned.
• The consumer fails to take the card within the time allowed after the
transaction session ended.
• A power failure occurs while the card is in the card reader, and the option
to return the card on power failure is not present.
Refer to the
Motorized Card Reader (with chip, 123) Operating Guide
(TP-820815-001C) for more information.
Figure 2-4 Motorized Card Reader
2-8
Copyright ©Diebold, Incorporated (9/2014, 8/2015, 12/2015, 3/2016) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 10/2017) - All Rights Reserved
TP-821763-001F