© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200430
Page 07.045.7
Technical Manual
DICTAMAT OpenDo
125
mm
=
=
125
mm
Page 07.045.07
Fig. 2
3. Mounting
- cont.
3b) Preparing the Door
Now screw the door actuator and both wheel hangers firmly to the
door. The door actuator should always be fixed in the middle of the
door leaf. Make sure that the wheel hangers are fixed at a sufficient
distance from the outer edge of the door. This distance should be kept
so that the drive and the idler pulley still have sufficient space in the rail
next to the wheel hangers.
Recommended:
•
125 mm distance to the outer edge on
both
sides of the door
If not already present, an additional slot must be prepared in the door
leaf for the floor guide (Fig. 12, Pg. 12).
