Dickye-John GAC 2500, Operator'S Manual

Page: 72 / 107

OPERATOR’S MANUAL
GAC® 2500 Model (INTL)
11001-1655A-201603
68
/
ANALYZING GRAIN
REGION CHANGE
The Region on the GAC 2500-INTL can be quickly changed prior to
analysis.
To Change Region:
1. At the Select Product screen, press the Region button.
2. Select the desired region at the Set Region screen.
3. Press the
Enter button to accept.
4. Press OK button to acknowledge change.
Figure 56
Region Change on GAC 2500-INTL
PERFORMING A GRAIN ANALYSIS
Screens that display during analysis will vary based on what configurations
are enabled or disabled at the System Setup/Sample Setup screens:
• Automatic grain measurement when hopper is full
• Sample ID and/or Customer ID screen prompt step
• User Login requirement
• Empty drawer requirement after each test
NOTE: To eliminate this screen before
each analysis, disable at the
Sample Setup screen.
To Begin Analysis:
1. If enabled, the Enter Sample ID screen appears. The selected product
and Issue ID displays at the top of the screen.
–
Change Product button allows selection of a different product.
– Dump button dumps product from the hopper.
Region
CA
DE
US
Set Region
X
DOWN
Set Region
Region Updated to CA
OK