Dickye-John GAC 2500 Operator'S Manual Download Page 15

Page: 15 / 107

OPERATOR’S MANUAL

GAC® 2500 Model (INTL)

11001-1655A-201603

PHYSICAL INSTRUMENT SETUP / 11

PHYSICAL INSTRUMENT SETUP

UNLOCK SHIPPING BRACKETS

The GAC

2500 instrument contains (2) shipping brackets that secure the

measurement cell during shipping. After unpacking the instrument, the
shipping brackets must be unlocked and placed in the operating location
before proceeding to setup and operation.

To unlock shipping bracket:

1. Remove Allen wrench from upper foam packaging insert.

Figure 4
Remove Allen Wrench

2. Carefully remove unit from packaging and place on a flat, sturdy

surface.

3. Remove grain drawer and set aside.
4. Place unit on its backside.

IMPORTANT: Be careful when placing

unit on back to avoid damage to security switch.

Shipping brackets

are located on the left and right side wall.

Figure 5
Remove Grain Drawer and Locate Shipping Brackets

5. Loosen hex bolt from the shipping locked location.

Shipping bracket
on each side wall

Summary of Contents for GAC 2500












































































































Search results

Summary of Contents for GAC 2500

Reviews:

Brands by name

Popular brands

Dickye-John GAC 2500, Operator'S Manual

Search results

Summary of Contents for GAC 2500

Reviews:

Brands by name

Popular brands