Dickye-John GAC 2500, Operator'S Manual

Page: 60 / 107

OPERATOR’S MANUAL
GAC® 2500 Model (INTL)
11001-1655A-201603
56
/
SETUP
CLEARING A DATABASE
The unit is capable of storing a maximum of 3,000 test results. The
database can be cleared at any time by selecting the Clear Database button
located under the System Setup screen. When stored data has reached
approximately 2,500 records, a warning screen automatically appears when
attempting a grain measurement that indicates memory capacity is getting
low. Analysis can still occur until the maximum allowed records of
approximately 3,000 is reached. Once maximum storage is reached, grain
analysis cannot continue until cleared.
To Delete Records:
1. At the System Setup screen, press the More button until the Clear
Database button displays.
2. Press the Clear Database button to display the Delete Results screen.
3. At the Delete Results screen, press the Delete All Results button.
– A Delete Engineering Data button appears if Engineering log files
are present. This button must be pressed to clear those records.
4. Press Yes to proceed with clearing records.
– Press No to abort record deletion.
NOTE: Instruments with a Region set
to Germany do not delete
records less than 90 days old.
Figure 45
Memory Capacity Low Screen
Your Response Needed
Your Response Needed
Yes
No
Delete All Results
System Setup System Setup
Clear Database
Check Scale
Delete Results? Delete Results?
Delete All Results
2515 Results in Database
Engineering log files present
Delete Engineering Data
Appears if
Engineering
files are present
Service Data