26/ SETUP
OPERATOR'S MANUAL
Dj SEED MANAGER® SE PLANTER MONITOR
BENCHMARK Series®
11001-1218-200112 Rev A
ter will be checked as part of the Sensor/
Module Self-Test and Error codes will be
generated if this value does not match the
actual number of Seed Sensors. Figure 18
shows twelve (12) seed sensors configured
on Module 3.
11. Row Status
This parameter allows placing individual
seed sensors in ON or OFF staus. For
those situations where it is necessary to
turn off certain rows on the implement,
OFF status turns off the related sensors
so alarms do not occur.
The display initially shows the messages
SETUP, ROW, 1, and the status of row
1. Figure 19 shows row 7 status set to
OFF. Press the SET switch to toggle
between ON and OFF the sensors.
Press the SELECT ROW switch to
advance to the next row. When the
status of all rows is correctly entered,
press SETUP to advance to the next
Setup constant.
Figure 18
Sensors Per Module Display
Figure 19
Row Status Display