Dibo 1.130.350, Original Instruction Manual

Page: 78 / 128

DiBO n.v. 78
12. Control cap
The control cap consists of PE and could be opened/closed easily by means of two locks.
Keep the cover cap closed when starting the spray activities.
Pay attention: make sure that the cap closes properly in the closing mechanism before you drive on the road with
the JMB-M.
Please note also: open the fall rail protection (as indicated below) from the gas spring each time before you want
to close the cap!
13. Working light / flashing beacon
The working light is mounted on the side of the operating part of the trailer, the flashing beacon is mounted on
top of the protective cap. Both lights can be turned on / off via the corresponding switch mounted at the side of
the control panel. Both switches are connected directly to the battery, do not leave them on unattended in order
to avoid deflation of the battery!
Note: do not turn on the working light / flashing light while driving on public roads!