Dibal POS-SCANNER, Adjustment Manual

Page: 14 / 28

POS-SCANNER
49-TPOSE-PSC-EN02
10
4.4. ADJUSTMENT.
This allows an adjustment to be done. The default value of 0 will always be shown. Change this to a value
of 1 and press the ‘*’ key.
Do not enter this option if you are not qualified or if you do not have the
calibrated weights.
Press to go to the next parameter.
4.5. LATITUDE ADJUSTMENT.
This allows the adjustment to be modified according to the latitude at which the scale is to operate without
carrying out a complete adjustment with calibrated weights. Program a value between 0 and 90.
Press to modify the value of the flashing digit.
Press to select the other digit.
Press to go to the next parameter.
4.6. ALTITUDE ADJUSTMENT.
This allows the adjustment to be modified according to the altitude at which the scale is to operate without
carrying out a complete adjustment with calibrated weights. Program a value between 0 and 9999
corresponding to meters above sea level.
Press to modify the value of the flashing digit.
Press to select the other digit.
Press to go to the next parameter.
4.7. ZERO WEIGHT ADJUSTMENT.
This will carry out an non-reversible calibration process with the scale. To do this adjustment, the user must
have the corresponding calibrated weights according to the maximum scale capacity. To leave adjustments
without doing this adjustment, press the
key. If the adjustment is to be done, remove all of the weight
from the plate and press the key to begin the zero weight adjustment. During the adjustment process, the
display will show hyphens. This process lasts various seconds.