Op
erator’s manual
version: 2021.06
21
4.3
C
ONNECTIONS OF
R
ESIN BOTTLE
STEP 1:
Remove completely the
3/8”
hand valve
connecting the two tubings.
This hand valve can be used for the inlet
water connection of the
O Maxi+
(see
chapter 4.2)
STEP 2:
1-
Connect the tubing with a
orange
ring
on the connector of the resin
bottle identified by the
yellow label
"
OUT
"
2-
Connect the tubing with a
red ring
on
the connector of the resin bottle
identified by the
red label
"
IN
”
STEP 3:
Open the hand valve 1/4" (
N°1
) and check
that the hand valve 1/4" (
N°2
) is properly
closed before replacing back the resin bottle
in the device.
Valve N°1
Valve N°2
Hand valve 3/8"
Orange ring
Red ring
