Op
erator’s manual
version: 2021.06
19
Telemetry management
The telemetry feature allows to monitor and to record the measurements of conductivity, pressure,
temperature, and status of the water purifier on a PC connected by a USB cable.
On the activation screen, to active/unactivate the telemetry function, press with a tool for 2 seconds on the
‘SET’
BUTTON.
When activated, the telemetry remains active even after restart of the water purifier.
SELECT:PRESS SET 2 SEC
SETTINGS
CALIBRATION
TELEMETRY
CONTRAST
SERVICE
WAITING USB
CONNECTION
..PRESS SHORTLY
SET KEY TO ABORT..
NO USB
SELECT:PRESS SET 2 SEC
USB TELEMETRY
TURN ON
The delay between 2 successive sending is 10 seconds.
The data are transmitted in one text line of ASCII characters, followed by the carriage and line feed
characters (CR+LF) using the following CSV format:
* A;B;C;D;E;F;G
with
•
A =PRODUCTION CONDUCTIVITY
•
B=PRODUCTION TEMPERATURE
•
C= MEMBRANE CONDUCTIVITY
•
D=MEMBRANE TEMPERATURE
•
E=INLET PRESSURE
•
F= MEMBRANE OUTPUT PRESSURE
•
G=ERROR CODE
As the USB connection emulates a serial port, a terminal emulator software as the open-source software «
TERMITE» can be used to receive the data on the PC.
The copy of the data in a file with the extension « .CSV » allows to open it later in a spreadsheet with the
data organized in columns.
