Op
erator’s manual
version: 2021.06
20
I
NSTALLING THE WATER PURIFIER
4.1
I
NSTALLATIONS
C
ONDITIONS
Water inlet (2 to 6 bars) equipped with a turn hand valve and a male exit tap of 1/2" delivered with the
packing list (male connector 3/8" quick fit/1/2" NPTF or water inlet valve 1/2" male/female).
Protected power supply (100-240 V ~ 50/60 Hz with GROUND). Connect the device to a power socket
located in a dry area more than two meters away.
Water drain with a siphon or the drain clamp supplied with the water purifier.
4.2
C
ONNECTIONS
Connect a hand valve on
the purified water outlet
Connect to the storage tank
Connect to the drain
Must be always OPEN to
not damage the system
Connect a hand valve
3/8”
on the tap water inlet
Connect to tap water inlet by
using « male simple union »
–
Integrate an « isolation hand
valve »
