Diamond TP-12/G Quick Start Manual Download

Page: 10 / 15

TROUBLE SHOOTING

N°

TROUBLE

CAUSE

CHECK / REPAIR

The igniter does not function

- The cable of igniter is disconnected

- The igniter is damaged

- Check and repair

- Change (call a technician)

The pilot burner does not light

- Gas runs out

- The gas line to pilot burner is closed

- The hole of nozzle Tipp of pilot burner
  is closed

- Check and fill gas
- Check and clean

The burner flame is yellow

- The primary air adjuster is closed

- The burner is dirty

- Check and open the primary air
  adjuster
- Clean with brush

The burner does not light

- The gas cock is damaged

- Check and change

The pilot flame lights but it
extinguishes again

- The thermocouple is slacked
- The thermocouple does not produce
   voltage (mv)
- The thermocouple is dirty

- Check and tight
- Check with Milivoltmeter, if the
  thermocouple is damaged,
  change it

- Check and clean

Summary of Contents for TP-12/G
















Search results

Summary of Contents for TP-12/G

Reviews:

Related manuals for TP-12/G

Brands by name

Popular brands

Diamond TP-12/G, Quick Start Manual

Search results

Summary of Contents for TP-12/G

Reviews:

Related manuals for TP-12/G

Brands by name

Popular brands