Diamond TP-12/G, Quick Start Manual

Page: 6 / 15

6
6.
Cleaning
The cleaning should be carried out after each use of the appliance.
Before cleaning all armatures must be placed in position -O-. The main gas cock is to be closed.
Clean with warm water, if required some detergent, non aggressive cleaner.
A strongly dirty plate can be pre cleaned with a scraper.
For cleaning do not use steel wool or scraper, since corrosion could occur also on stainless steel.
The frying plate should be rubbed with a oil soaked cloth, to avoid corrosion.
➪
Attention! Don’t clean the range with high pressure water
The range will be have more long use life and smooth work, if you have regular clean every day.
7. Service
The appliance requires a regular service. We recommend a service contract.
Service and repairs may only be carried out by the producer or service agent with qualified staff.
For Service and repairs only original parts should be used.
During Service, security arrangements of the appliance, function of burners and operation of burning operation is to
be checked. It is to control that no lift off or back stroke of the burners in hot condition occurs.
All gas pipes and parts must be controlled for closeness. Slits of the burners and nozzles in the primary air
segment must be free of foreign debris.
The gas armatures must be checked for easy of operation. In case of heavy movements, requires the exchange of
these parts. Application of grease, in exceptional cases may only be done by the service engineer. Sealed parts of
the producer may not be touched by the service engineer. If apart from the listed works other repairs should be
required, same should be done.
Only proper handling of the appliance, regular service by service technicians, guarantees problem free function of
the appliance with operation security.
This is also in view of legal regulations for technical equipment as well as accident regulations.
8. Behaviour in disturbances
Disturbances can occur due to mistakes in the gas supply, dirtiness of functioning parts, wrong handling or failing
ignition, regulators, function of control parts.
If the gas supply is ok., all functioning parts clean, wrong handling excluded, you have to call a service engineer.
In case of disturbances the gas armature (main gas cock) must be closed.
Repairs may only be carried out by qualified service engineers under consideration of ruling regulations for
operation and installation.