DA 40 AFM
Normal Operating
Procedures
Doc. # 6.01.01-E
Rev. 8
01-Dec-2010
Page 4A - 29
4A.3.9 CRUISE
1.
Flaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UP
2.
Throttle . . . . . . . . . . . . . . . . . . . . . . . . . . . . set performance according
to table
3.
RPM lever . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 - 2400 RPM
NOTE
Favorable combinations of manifold pressure and RPM are
given in Chapter 5.
NOTE
To optimize engine life the cylinder head temperature (CHT)
should lie between 150 °F (66 °C) and 400 °F (204 °C) in
%
continuous operation, and not rise above 435 °F (224 °C) in
%
fast cruise.
NOTE
The oil temperature in continuous operation should lie
between 165 °F (74 °C) and 220 °F (104 °C). If possible, the
%
oil temperature should not remain under 180 °F (82 °C) for
%
long periods, so as to avoid accumulation of condensation
water.
4.
Mixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . set in accordance with
4A.3.10 - MIXTURE
ADJUSTMENT
CONTINUED
Summary of Contents for DA 40
