Elton User Manual Rev 1.04
Page 23
LVDS LCD Connector: J7
The Low-Voltage Differential Signaling (LVDS) LCD connector interface defines the physical layer
parameters for differential, serial communication protocols and is used in conjunction with a data link layer.
It operates on low power and performs at high speeds.
The pinouts for the LVDS-LCD connector are specified below.
VDD 5V/3.3V
1
2
VDD 5V/3.3V
VDD 5V/3.3V
3
4
VDD 5V/3.3V
CLK+ Odd
5
6
CLK+ Even
CLK- Odd
7
8
CLK-Even
Ground
9
10
Ground
D0+ Odd
11
12
D0+ Even
D0- Odd
13
14
D0- Even
D1+ Odd
15
16
D1+ Even
D1- Odd
17
18
D1- Even
D2+ Odd
19
20
D2+ Even
D2- Odd
21
22
D2- Even
D3+ Odd
23
24
D3+ Even
D3- Odd
25
26
D3- Even
Ground
27
28
Ground
DDC CLK
29
30
DDC DATA
Connector Number/Type:
TFM-115-02-L-DH; Side Entry; Type Pin Header
Mating Cable Part Number:
Part Number is specific to the LCD Model in use.
LCD Backlight Connector: J4
The LCD backlight and the display data are powered by separate connectors. The pinouts for the LCD
backlight connector are specified below.
1
Power, +5V/+12V, Jumper selectable
2
Power, +5V/+12V, Jumper selectable
3
Ground
4
Ground
5
Backlight Enable (GPIO output), 0 = off, open circuit = on
6
Brightness control
Connector Number/Type:
JS-1147H-06; Right Angle, Type Friction Lock Pin Header
Mating Cable Part Number:
Part Number is specific to the specified LCD Model in use.