INTRODUCTION
Introduction
Welcome to the Diamond Products family and thank you for choosing Diamond Products equipment.
At Diamond Products we are driven to ensure you are completely satisfied with your product and
continually strive to improve our product line so that we can offer you the best possible equipment in
the industry.
This operator’s manual is a critical document that provides pertinent information regarding the safety,
operation, maintenance, and care of your new equipment. Keep this manual available at all times.
Operate the equipment and all of its components according to this manual. Failure to comply with and
understand the following safety, operation and maintenance instructions can result in serious injuries
and/or death. All operators must be properly trained or supervised by experienced personnel prior to
using this saw and should understand the risks and hazards involved. Diamond Products discourages
improper or unintended equipment usage and cannot be held liable for any resulting damages.
Equipment modifications should be made by Diamond Products to ensure safety and design. Any
modifications made by the owner(s) are not the responsibility of Diamond Products and void all
equipment warranties if a problem arises as a result of the modification.
Refer to the Diamond Products Parts List for additional information and part diagrams. Refer to the
engine/motor manufacturer as the primary source for all safety, operations, and maintenance
instructions regarding the engine/motor. Prior to operating, record the saw’s serial number, and the
engine/motor’s model and serial numbers in Appendix D.
Early Entry Technology
Timing is a critical factor when it comes to concrete. It is crucial that the jointing process be completed
as early as possible to help control cracking from stresses created as the concrete cures and dries.
The Diamond Products Early Entry saws were developed as high speed, light weight, up cut saws to
allow for this type of operation. They incorporate a spring box technology that uses a skid plate to
prevent chipping and spalling which can lead to an unsightly finished product. The spring box also
keeps the dust from the cutting process down and when combined with a dust collection system can
almost eliminate the dust altogether. Proper use of these saws will provide a beautiful end product
that will last for years.
6
Summary of Contents for CC125BXL-EE6
Page 2: ......
Page 43: ...REFERENCES ...
