MAINTENANCE
Front and Rear Wheels
Replacing the Front Wheels
Inspect the front wheels regularly for damages
or wear and replace as necessary.
1. Loosen the two socket head screws on the
front wheel shaft collar and pull the collar
off.
Front Wheel Shaft Collar
2. Remove the wheel from the wheel shaft
and place a new wheel onto the wheel
shaft.
3. Reinstall the front wheel shaft collar and
tighten the two socket head screws to
secure.
4. Repeat steps 1–3 to replace the second
wheel.
Replacing the Rear Wheels
Inspect the rear wheels regularly for damages
or wear and replace as necessary.
1. Remove the two bolts and associated
washers from both ends of the rear wheel
shaft that attach the axle weldment to the
frame.
Rear Wheel Bolts
2. Loosen the set screw in the cable pivot pin.
Cable Pivot Pin Set Screw
3. Remove the cable nut from the cable end
that attaches to the axle weldment.
Cable Nut
4. Remove the axle weldment from the frame.
5. Remove the retaining ring from each outer
wheel, and then remove the outer wheels
from the axle.
6. Remove the inner retaining ring from either
side of the middle wheel, slide the axle in
the opposite direction, and remove the
middle wheel.
7. Fit a new wheel into the middle wheel
position, slide the axle through the wheel,
and realign the axle with the carriage.
33
Summary of Contents for CC125BXL-EE6
Page 2: ......
Page 43: ...REFERENCES ...
