Dialogic® 4000 Media Gateway Series Reference Guide
page 61
Informational messages
Informational messages refer to successful operation events such as starting or stopping the service:
See the following for informal events. Variables are enclosed in angle brackets:
3006
Cannot process call from <Calling Address>
to <Called Address>. Codec negotiation
failed.
A call could not be established because non of the audio codecs
support by and allowed for the SIP peer could be used for the call
and no alterntive targets were available.
3007
Can not establish TLS connection to
<address>: <Reason>.
No TLS connection could be established to the SIP peer. <Optional
Reason> gives more details if available.
3008
TLS certificate verification failed with error
<OpenSSL errorcode>.
The TLS certificate presented by the peer could not be verified
successfully. The error code is the value returned by the TLS library.
3009
TLS Data Error
An error occuring during TLS data processing. The trace may give
additional information.
Event ID
Event Text
Event Description
4000
Service started.
Service has been started successfully.
4001
Service stopped.
Service was requested to stop or shutdown, and did so successfully.
4002
Configuration successfully updated.
Called when service configuration has been successfully updated.
4003
Call from <Calling Number> to <Called
Number> established.
The <Calling Number> and the <Called Number> are inserted. The
Number can be a PSTN or SIP address.
4004
Call from <Calling Number> to <Called
Number> disconnected.
The <Calling Number> and the <Called Number> are inserted. The
Number can be a PSTN or SIP address.
4005
Call from <Calling Number> successfully
transferred to <Called Number>.
The <Calling Number> is the calling number. The <Called
Number> is the number of the transfer destination.
4006
Registration to <Registrar Host Name> with
user<User Host Name> is successful.
The registration to a registrar with the user to register is successful.
4008
Cannot process call from <Calling Number>
to <Called Number>, <Reason>.
The <Calling Number> and <Called Number> are inserted, the SIP
or Q.850 cause code text is inserted at runtime. Different reasons
(busy, rejected,…) are translated to runtime.
4009
Available/changed licensed channels
<Licensed channels>.
List the amount of licensed channels. If no license file is read, the
default is "8" licensed channels. Issued if the licensed amount
changes, e.g., after a new license file has been installed.
4010
Available/changed PSTN channels
<PSTNChannels>.
Gives the amount of available channels to the telephone network.
Called if the number changes due to configuration updates or
controllers being enabled/disabled.
