Dialogic® 4000 Media Gateway Series Reference Guide
page 91
5.
Repeat steps 3 and 4 for the other PRI line.
6.
In the Diva SIPcontrol software web interface, click
SIPcontrol configuration
on the left hand side to open
the
SIPcontrol Configuration
page. For this configuration scenario, the PSTN interface, the network
interface, a SIP peer, and a routing need to be configured.
7.
Go to
Network Interface Configuration
, set the
SIP Listen Port
to
5060
,
and check the
Enabled
box
of your Ethernet adapter.
8.
Configure the SIP peer settings. To do so, open the
SIP Peer Configuration
, click
Add
, and configure the
following parameters:
Under
Edit SIP Peer Configuration
, configure the following parameters:
•
Name
: Enter a name for the SIP peer configuration.
•
Peer type
: Select
MS Exchange 2007
as peer type.
•
Host
: Enter the IP address or host name of your Unified Messaging server.
Under
Enhanced Configuration
, enable the
Default SIP to PSTN peer
check box.
Click
OK
to save the settings and to close the window.
