Dialogic® Diva® SIPcontrolTM Software Configuration
page 28
Address Normalization For Condition Processing (Using Source Dialplan)
You may configure the parameters shown in the graphic and explained below:
Conditions
You may configure certain conditions for a route. If you do not configure any conditions, the route is used as
default route.
Note:
If prefixes need to match, the digits of the prefix need to be prepended by a caret symbol ("^"); otherwise,
these digits would match within the number as well, e.g. 0 would also match [email protected].
You may configure the parameters shown in the graphic and explained below:
Note:
A route can only be matched if the three condition parts (called number, calling number, and redirect
number) match their call address counterpart in any of the lines. Empty condition entries always match, i.e., a
line with the three condition parts left empty will always apply, thus working as a default route.
Max. call attempts
for this route in a
failover scenario:
Enter the number of times the Diva SIPcontrol software should try to call the recipient in a failover
environment. If you enter 0 (zero), the Diva SIPcontrol software tries all selected destinations. A
value of 1 disables the failover functionality and tries only the first destination of a route.
Number format:
This parameter determines the shortest format allowed in calls using this route. You may modify
this parameter only if you selected a dialplan from the drop down menu. The following options are
available:
Unchanged
: The number signaled in the SIP message will be used unchanged for dialing.
International number
: The number is always converted to an international number, including
country and area code.
National number
: The number is converted to a national number unless it is an international
number with a different country code.
Extension:
The number is reduced as much as possible. An internal number is reduced to its
extension only.
For more information about number formats, see
Number Processing With The Dialogic® Diva®
Encoding:
Determines if numbers in calls using this route should either be encoded as unknown number with
national or international prefix digits or as national or international number with type flags.
Called number:
If the routing is supposed to be valid only for specific calls, enter the called party number to which
the route should apply. The Dialogic
®
Diva
®
SIPcontrol
TM
Software compares the current called
party number against the called number entered here. If they do not match, the Diva SIPcontrol
software verifies the next routing until it finds a match.
Calling number:
If the routing is supposed to be valid only for specific calls, enter the calling party number to which
the route should apply. The Diva SIPcontrol software compares the current calling party number
against the calling number entered here. If they do not match, the Diva SIPcontrol software verifies
the next routing until it finds a match.
Redirect number:
If the routing is supposed to be valid only for specific calls, enter the redirecting number to which
the route should apply. The Diva SIPcontrol software compares the current redirecting number
against the redirect number entered here. If they do not match, the Diva SIPcontrol software
verifies the next routing until it finds a match.
