
Dialogic® 4000 Media Gateway Series Reference Guide
page 79
• To create the second address map, click
Add
again, and configure the following parameters:
•
Address map name
: Enter a name for the outgoing call address map.
•
Rule name
: Enter a name that describes the address map rule. This name will be displayed on the
main configuration page.
•
Calling address expression
: Enter the calling address expression as shown in the graphic above.
With this expression, the OAD will be removed from outgoing calls.
Click
OK
to save the settings and to close the window.
9.
Under
PSTN Interface Configuration
,
configure controller 1 with PBX-specific settings and controller 2
with PSTN-specific settings. The controller number you configure with PBX-specific settings needs to
correspond to the line number in the Diva Configuration Manager that you configured with the switch type
of your PBX. The same is true for the controller with the switch type of the PSTN line.
• To configure PSTN-specific parameters, click
Details
at the right of the controller connected to the PSTN
line. Select the inbound and outbound address map that you configured for access from the PSTN. Select
the
Dialplan
you configured for the PSTN, set
Number format (outbound)
to
National Number
,
and
Encoding (outbound)
to
Use prefixes
.
Click
OK
to save the settings and to close the window.