10
personnel from the brand´s official technical support service may carry out repairs or procedures on the device.
Only an official technical support service centre may carry out repairs on this product.
B&B tRENDS SL.
disclaims all liability for damages that may occur to people, animals or objects, for the non-ob-
servance of these warnings.
BEFoRE tHE FIRSt USE
In the first use they can break off odours or fumes that sent quickly. Do not spray for the first time on clothes and
there may be traces of dirt on the steam head.
Remove the mains plug from the wall socket before filling (or emptying) the garment
Insert the telescopic aluminium rod in the holders, then open the aluminium rod lock and expand the telescopic
aluminium then close the aluminium rod lock to fix them. Insert the hanger in the top.
Install the steam pipe fixed button press and turn the left to the position lock.
Take out the water tank and unscrew the filler plug. Fill the water tank to the top and screw the filler cup. Your
appliance was designed to operate using untreated tap water and Return the water tank to its place on the
appliance then plug it in.
Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened water, rain
water, filtered, bottled or boiled water, water from refrigerators, batteries or air conditioners as these may damage
the appliance. These types of water contain organic waste, mineral elements that become concentrated when
heated and cause spitting, brown staining, leaking or premature wear on your appliance. If your water is very
hard, mix 50% untreated tap water with 50% distilled water.
HoW to USE
Before the using please check the fabric´s label for recommendations.
We recommended that you test acrylic, nylon or other synthetic fabrics in an inconspicuous area to ensure these
fabrics are not damaged by hot steam.
Use clothes in the hanger to iron.
Plug-in the appliance and turn the button to left (G) the light is brighter. Wait approximately
1min
, the
appliance is ready to use. You can choose the quantity of the steam that you need accordingly the fabric.
For optimal use, pass the steam jets over your garment from top to bottom.
As steam is very hot: never attempt to remove creases from a garment while it is being worn, always hang gar-
ments on a clothes hanger.
The fabric brush opens the weaves of the fabrics for better steam penetration, and the clamp if you want to do
creases in your clothes. Before removing or attaching the steam brush or clamp, unplug your appliance and allow
it to cool down.
During use or while unit is heating or cooling do not rest appliance on its head. Place the product on a stable, heat
resistant, flat surface, as the head will be hot. As the appliance heats, the housing becomes warm. This is normal.
Remove the main plug from the wall socket. Wait for an hour for your appliance to cool before storing.
MAINtENANCE AND CLEANING
After use it, please remove the water tank, empty the water tank completely, and then return the water tank to
its place.
Before cleaning the garment steamer ensure it is unplugged from the power supply and has completely cooled
down.
Do not use abrasive cleaners.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will
damage the surface.