DHOLLANDIA
47
Switch off the electrical power to the
liftgate (cabin switch or main battery
disconnect switch in the external control
box, or both if both are available). Close
the cover of the control box.
LIFT the closed platform up to the vehicle
floor to stow it in its travel position and
engage the mechanical stow lock.
Continue to press LIFT until you hear the
hydraulic system go in overpressure.
Then, release the controls.
Depending on the start position, LOWER
or LIFT the platform to approx. 6” below
the vehicle floor level.
Make sure you comply with load charts
and instructions at all times
LOWER the platform to the ground.
LIFT the platform off the ground. At the
vehicle floor, continue to press LIFT until
you hear the hydraulic system go in
overpressure. Then, release the controls.
Closing up in travel position
If so equipped, stow the cart-stops or
retention ramp built into the platform. The
cart-stops are operated by foot; the
retention ramp by hand.
CLOSE the platform. Continue to press
CLOSE until you hear the hydraulic
system go in overpressure. Then, release
the controls.
Unless folding automatically, stow the
safety rails and lock them in their travel
position.
