DHOLLANDIA
41
§9.6 – Operation of column lifts DH-VO.07.K9 / DH-VO.15.K9 with manual closure
•
§9.2 through §9.4 above explain how each of the functions LOWER - LIFT are activated via the various types of controls. This
section explains in which sequence the DH-VO* with manual closure must be operated, and which steps must be followed.
•
The images shown refer to instruction decal ref. EF0591.EN, usually affixed to the side of the vehicle body. See also section 10
from page 52 onwards.
Consult the operation manual before
getting started. Follow
ALL
safety and
operation instructions.
Switch on the electrical power to the
liftgate (cabin switch or main battery
disconnect switch in the external control
box, or both if both are available).
LOWER the platform approx. 6” to
disengage the mechanical stow lock.
Opening the platform
ALWAYS stand on the side of the platform, when opening it.
1. Raise the lever of the platform lock at the basis of the lift runner.
2. Manually OPEN the platform to the 90° open position. Push the platform
down firmly, to ensure that the platform lock now locks the platform down
in the open work position.
If so equipped, deploy the cart-stops or
retention ramp built into the platform. The
cart-stops are operated by foot; the
retention ramp by hand.
